Noise Supressors
Pyramid
NS-20
200 Watts Noise Suppressor Designed to Eliminate Noise Used with Amplifier Matches Impedance Between Amp & Deck RCA Plugs
Pyramid
NS-21
250 Watts Noise Suppressor Easily Installed with RCA Jacks Designed to Eliminate Noise Used with Amplifier Matches Impedance Between Amp and Deck
PAC
SNI-35
To Add an Amplifier to a Factory Radio Linear for 20 - 20 000Hz Transformer Isolation Between Inputs and Outputs Keep Signal in Phase Adjustable from 2 Watts to 40 Watts per Channel Works with Most...
PAC
CSS-12
Eliminates System Noise Generated in the Vehicle's Power System For Wider Frequency Noise Suppression 12 Amps Rated Choke and Capacitor Toroid Works with Most Vehicle Power Systems
PAC
ANI-33
Eliminate Antenna Induced Ground Loop Noise Easy Installation Plug and Play Uses a Toroid Coil to Isolate the Antenna from the Radio Works with Most Antennas Using a Motorola Type Connector An...
PAC
SNI-1
Eliminates Ground Loop Noise Between Head Unit and New Amplifier Perfect Frequency Response from 20 - 20 000Hz Provides a 1.3dB Gain Simple RCA Connector Inputs and RCA Connector Outputs Works on...
PAC
SNI-1/3.5
Eliminates Ground Loop Noise Between Head Unit and New Amplifier Perfect Frequency Response from 20 - 20 000Hz Provides a 1.3dB Gain Works on Most Head Unit and Amplifier Combinations
PAC
SNI-15
To Add an Amplifier to a Factory Radio Linear for 20 - 20 000Hz Transformer Isolation Between Inputs and Outputs Keep Signal in Phase Adjustable from 2 Watts to 30 Watts per Channel with Fixed 10:1...
New Products For March - Installation & Accessories |
Your IP Address is: 38.107.191.106
Copyright © 2007 - 2010 Stomp Audio
|















