|
These are special devices used to install or add audio and video options with your vehicles configuration. Vehicles with premium sound, OnStar, Navigation and even some door chimes require the use of these special devices.
Interface Devices
PAC
AOEMGM-24
Add an Amplifier or Replace Factory Radios in Most Sound Systems Plug and Play Installation Adjusts Up to 4 Channels of Signal Input from 2 to 60 Watts Isolates the Input and Output Circuits Sealed...
PAC
AAI-GM12
Auxiliary Audio Input Interface for 03-05 GM Class II Vehicles Information The AAI-GM12 allows direct interface of any preamp level audio source to a 2003-2006 GM Class II factory radio with a slave...
PAC
AAI-GM24
Auxiliary Audio Input Interface for 03-05 GM Vehicles Information The AAI-GM24 is a standalone auxiliary input for most 2003-2006 GM vehicles. Unlike our AAI-GM12, the AAI-GM24 works with vehicles...
Metra
MITO02
4-Channel RCA Input Provides Amp Turn On Signal via Data Wires One 20-Pin Connector and One 18-Pin Connector
ROSEN VIDEO
DP1030
4 Sensors Interface Harness
PAC
VCIBMW356
BMW '06 - "3" Series, '04-06 "5" Series, '05-06 "6"Series VCIBMW356 Information Allows 2 Video inputs, 1 backup camera input & RGB navigation input. Built in Audio/Video switcher Great for lease...
SoundGate
CANPULSE2
Picks Up CAN-BUS Data & Converts it to a Conventional Analog Speed Pulse Used to Add Aftermarket Navigation Radios Connects to the Exterior CAN Wiring of the Vehicle CANPULSE Interfaces are Not...
|
Your IP Address is: 38.107.191.81
Copyright © 2007 - 2010 Stomp Audio
|














