|
These are special devices used to install or add audio and video options with your vehicles configuration. Vehicles with premium sound, OnStar, Navigation and even some door chimes require the use of these special devices.
Interface Devices
PAC
ABCHR-95
Plug-and-Play Harness for Use with AUX-BOX Interface Connects Audio Source Directly Into Factory Radio for Optimum Sound Quality
PAC
ABFRD-12
Plug-and-Play Harness for Use with AUX-BOX Interface Connects Audio Source Directly Into Factory Radio for Optimum Sound Quality
PAC
ABCHR-10
Plug-and-Play Harness for Use with AUX-BOX Interface Connects Audio Source Directly Into Factory Radio for Optimum Sound Quality
Metra
LCGMRCLAN03
Not Compatible w/Amplified Sound Systems Provides 12V DC 3A Accessory Output Retains Warning Chimes with Built-In Speaker Use In Non-Amplified Vehicles or if OEM Amplifier Is Bypassed Onstar is Not...
Metra
GMOS044
The GMOS-044 is designed to retain Onstar and warning chimes that- are normally lost when the OEM radio is removed. This interface device is to be used with the following vehicles. Buick Allure 2010...
PAC
C2ACHY23
Add an amplifier to your 2008+ CHRY/DODGE/JEEP/VW that uses the CAN Bus then you're going to need this interface. This interface reads Can Bus signals and provides you with audio out via RCA that can...
PAC
AAGM44
Amplifier Integration Interface for Select 2010 & Up GM Vehicles T-Harness Plugs Into the Vehicle's Wiring Behind the Factory Radio 4-Channel Adjustable Audio Output via 2 Sets of Stereo RCA...
PAC
C2ACHY3
Plugs into the vehicle's CAN bus and provides a stereo RCA audio output for adding aftermarket amplification. Provides full range audio output 20-20,000Hz. Audio output level is controlled by the...
PAC
AOEMFRD24
Plug and Play Add-an-Amplifier Kit For Factory Amplified and Non-Amplified Audio Systems Add an Amplifier to Ford. Fast & Accurate Installation without the Need to Cut Wires or Splice Wires OEM-1...
|
Your IP Address is: 38.107.179.210
Copyright (c) 2012 Stomp Audio
|



