CAN-BUS Module For Steering Wheel Control Interface SWI-CAN
Information
| The SWI-CAN is a necessary interface for vehicles with SWC controls that broadcast on a dual wire CAN bus. This module will interpret CAN bus messages and convert them to an analog output for the SWI-X, SWI-JACK, SWI-ECL or SWI-PS. |
Currently Supported Vehicle
Vehicles currently supported (up to r1.4.10a):
2004-2007 Durango
2005-2007 300c, Magnum, Charger, Commander, Grand Cherokee
2006-2007 Ram, Dakota
2007 Caliber, Aspen, Compass, Patriot
Vehicles Added With r1.4.12:
2002-2007 VW
2002-2007 Audi
2003-2004 Mercedes C-Class and CLK 320
Vehicles Added with r1.4.14:
2005-2008 Porsche Cayenne
|
Installation Instructions
Including Audi, Chrysler, Mercedes, Porsche and VW Click Here
Application guide for the SWI-CAN interface. Refer to the product
description for vehicle compatibility by revision number. Click Here |
