4-Channel MOSFET Amplifier 2500Watt

StompAudio Brings you Multi Channel Amplifiers By: Bass Inferno

• This Amp from Bass Inferno offers 250 Watts of sub blasting power at 4 ohms to 4 separate Sub Woofers! If you need more power it is capable of 500 Watts of power at 2 ohms to 4 separate Sub Woofers! Still not enough? Bridge this bad boy and you'll come out stomping with 2000 combined Watts on a 2ohm load running 2 channels. This isn't the beefed up numbers you see on cheap back alley amps this is true output tested at the factory.

• Class A/S Circuitry,
• Audiophile Grade Components,
• High Efficiency MOSFET Outputs,
• On Board Fully Variable Low/High Pass Crossovers,
• Enhanced Peak Performance,
• Power Fusing,
• 2 Ohm Mono Capability,
• Bridgeable,
• DC Offset Protection,
• Short Circuit Protection,
• Thermal Protection,
• L.E.D. Power Indicator,
• Built-In Variable Crossover,
• Power and Speaker Distribution Blocks,
• Input Voltage: 14.4V
• Remote Turn-on,
• Adjustable Input Sensitivity,
• Dimensions (LxWxD): 13" x 9" x 2.125" (33.5cm x 22.9cm x 5.4cm)
  

Rated Power @ 14.4-Volts
4 x 500 Watts @ 2 Ohms
4 x 250 Watts @ 4 Ohms
2 x 1000 Watts @ 4 Ohms
Frequency Response: 2kHz - 28kHz
Crossover Slope: 12dB
Bass Boost @ 45Hz: 12dB
Input Sensitivity: .2Mv - 5V
S/N Ratio: >95dB
THD @ Rated Power: <.05%