1-Channel Mono Block Class A/B MOSFET Amplifier 2500Watt

StompAudio Brings you Mono Channel Amplifiers By: Bass Inferno

• This Amp from Bass Inferno offers 1250 Watts of sub blasting power at 4 ohms! If you need more power it is capable of 2500 Watts of power at 2 ohms! This isn't the beefed up numbers you see on cheap back alley amps this is true output tested at the factory.

• Class A/B Circuitry,
• Audiophile Grade Components,
• High Efficiency MOSFET Outputs,
• On Board Fully Variable Low/High Pass Crossovers,
• Enhanced Peak Performance,
• 2 Ohm Mono Capability,
• Bridgeable,
• DC Offset Protection,
• Short Circuit Protection,
• Thermal Protection,
• L.E.D. Power Indicator,
• Built-In Variable Crossover,
• Power and Speaker Distribution Blocks,
• Power Fusing,
• Remote Turn-on,
• Adjustable Input Sensitivity,
• Dimensions (LxWxD): 15.25" x 9" x 2.125" (39.4cm x 22.9cm x 5.4cm)
  

1 x 1250 Watts @ 4 Ohms / 1 x 2500 Watts @ 2 Ohms Rated Power @ 14.4-Volts
Frequency Response: 20Hz - 250Hz
Crossover Slope: 12dB
Bass Boost @ 45Hz: 12dB
Input Sensitivity: .2Mv - 5V
S/N Radio: >95dB
THD @ Rated Power: <.05%
Bass Boost
Line Out